Glass Shield from Oblivion : Printable Files

Description

THIS IS NOT A PHYSICAL PRODUCT – JUST A 3D FILE

Files Included

1.2mm thick version of the shield (which I printed successfully)

3.6mm thick version

Cut version of the 1.2mm thick I printed on my CR10

File Specs

Poly Count

File Format:

OBJ

Additional Notes

There is no built in mountint to attach this onto your arm, but strips of faux-leather or similar can be affixed with strong glue or epoxy
You can see a rotatable preview of the model here: https://skfb.ly/6XBt8
Due to the variety of printer sizes, the files don’t come pre-sliced. You’ll need to split the piece yourself before you print it and add any support holes you need
Files will slice in Cura (my slicer of choice). Other slicers haven’t been tested. If you have issues in a given slicer, please contact me and I’ll tweak the files as needed.

Liscensing

Noncommercial

——–Brief Descriptions———

Noncommercial: For personal use only. Files are not to be sold, redistributed or combined with outside files to produce derivatives. Prints aren’t to be actively marketed, sold, or otherwise distributed

Commercial Limited: Files are not to be sold, redistributed or combined with outside files to produce derivatives. Prints can be sold for profit so long as you credit/link where you got the files.

For more info see https://www.grumpyalison.com/faq/

Fancy Eyes

The model in Sketchfab (above) reflects the ideal of how the eyes would turn out. The idea was to basically create a giant glass eye that could be added into the sword.

I’ve included separate models for irises (big & small) that can be printed and then cast into a resin mold (which I’ve included files for as well, though they’d need significant post processing to get a nice finish). These cast resin eyes should then fit into holes I’ve punched into the sword itself.

I haven’t tested any of this, but I included the files in case anyone else wanted to play with it. If you do test it and have pictures of the results, I’d love to see them. Suggestions about improving the eye models are also welcome.

Reviews

There are no reviews yet.

Be the first to review “Glass Shield from Oblivion : Printable Files”